fbpx JOIN LOGIN JOIN

Crimson Hunter Assembly Tips & Tricks

By Rob Baer | April 14th, 2015 | Categories: Eldar, How To Tutorial, Videos

m3250268a_99120104032_CrimsonHunter01_873x627_enl

The Crimson Hunter is an amazing looking flyer, and what makes it look so good also makes it hard to build.

This model has a ton of parts! Make sure you have them all, before you get started as a lot of the air with support of the airframe!

2015-04-06_2357

Also you want to make sure you do a good job de-flashing and filing down all the mold lines so the airframe not only fits together right, BUT looks good on the seems that are viewable as well.

When it come to assembling this awesome aircraft, you have to be super careful with the crazy shaped airframe, and all the parts that attach to it.

2015-04-06_2359

Rubber bands will not always be able to stretch to aid in support while pieces dry on this model. You may have to use low tac painters tape to help hold everything together.

Go in-depth and watch the whole assembly, plus get more techniques to add to your hobby arsenal in the Crimson Hunter tutorial below!

About the Author: Rob Baer

Virginia Restless, Miniature Painter & Cat Dad. I blame LEGOs. There was something about those little-colored blocks that started it all... Twitter @catdaddymbg