Display Scale First Knight Miniature 100mm: 3dArtGuy

The knight of immaculate chivalry. He has dedicated his entire life in service to his liege and smites any foul monsters that dares to intrude upon their domain.

This version of the First Knight is NOT designed for use in wargames, and it is recommended for use as a fun painting project or even for terrain!

Choose Your Pose:

• Display Scale Command & Victory Pose: This is an 11-piece multi-part kit, including two different heads, a bare and helmeted one, plus one arm holding a helmeted head and one with a fist that makes two different poses.
• This model is approximately 100mm (about 4" tall) Display scale modes are NOT designed for use in wargames, and it is recommended for use as a fun painting project, or even for terrain!
• Each model is printed to a 25-micron standard in our new Void Resin that makes 3d prints feel and act more like plastic, plus the strength benefits are amazing.

Watch us disrespect a model printed with Void Resin below:

• We are an official licensee of 3DArtGuy. Miniatures Sales & Marketing Contracted Though Spikey Bits and Fulfilled By Slicer LLC.

Support 3DArtGuy on Patreon if you are after just the .STL files!

• All products are printed to a 25-micron standard using high-quality cured resin. Just like any miniature kit it is unfinished, comes unpainted, and unassembled attached to its support structure from the production process.
• Parts are pre-cleaned and ready for primer once removed. Basic hobby skills and tools are required to finish this model. Plastic bases are not included.
• The images shown are the stock photos of the rendered miniature while painted models are for reference only, and not included.
• To remove the bits from their supports: submerge the whole assembly in water that is hot to the touch for 5 minutes. Use your fingernail to punch away several supports to create a starting point, and carefully peel your parts off of the remaining supports altogether. More delicate parts may require clippers or a hobby knife.
• Do not attempt to remove supports from a model while at room temperature. Keep the model out of direct sunlight or extremely cold temperatures. As always, use caution when working with resin material and hobby tools.