This Elegoo Saturn 2 review shows 3d printing for Warhammer miniatures, busts, and dioramas; and if this is worth the buy!
Fauxhammer has some unique Warhammer and tabletop hobby content, and if you need some sweet tips, you should follow him to get up on all your painting and conversion techniques!
We’ll say this to start; he bought this, and it’s not a sponsored video. He really likes it, but the biggest problem might just be how excellent all the other Elegoo printers are!
Elegoo Saturn 2 Review For Warhammer Miniatures, Busts, & Dioramas
Click Here to Get Yours From Amazon| or from Elegoo
Here are the specs on this:
- 【10″ 8K Monochrome LCD】 ELEGOO Saturn 2 adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680×4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.
- 【43% Larger than Saturn’s Printing Volume】With a build volume of 219x123x250mm / 8.62×4.84×9.84 inch and a 10″ large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.
- 【Fresnel Collimating Light Source】Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength, excellent printing accuracy, and a more smooth surface finish.
- 【Reliable Printing Performance】The Z-axis is designed with dual linear rails and non-slip hexagon socket leveling screws for ultra-steady & accurate movement and remarkable printing performance. The sandblasted surface build plate provides much stronger adherence, and PFA release liner with easier model removal and less release tension.
- 【Odor-free Printing Environment】The air filtration system with an activated carbon filter can absorb most of the resin odor, creating an odor-free fresh printing environment. Double heat-conducting copper heat tubes with faster heat transfer and better heat dissipation efficiency prolong the service life of 3D printers
What He Likes
- This has a big build plate, which means you can print out more than a combat patrol on one plate!
- It has excellent resolution, but he can tell the difference between the highest levels of printers and this.
- It has a carbon filter, which cuts down on smells.
- Leveling on this is pretty simple.
- The lid comes with a vent hole, meaning you can send the smells and such outside!
- You get a ton of extras, like screws, clippers, etc.
- Good print quality.
- Can print everything from small minis to large-scale busts and dioramas.
- It does very well with clear resin.
What He Doesn’t Like
- A general lack of extra features.
- Doesn’t come with a screen protector.
- The build plate is connected to the arm with a ball axis, which can lead to many problems. However, it never really led to any issues yet for him.
- The USB is on the back, and it’s just inconvenient
- The vat is too small; considering this is a big printer, you need more resin!
- The fan is almost always on and gets very annoying over time.
How the Printed Minis Look
As you can see, they come with a ton of detail, and you can really print out a lot of minis at once!
When compared, it’s pretty hard to tell the difference, honestly.
Would He Recommend This?
A lot of the issues with this are small and could be easily fixed by Elegoo. Overall, this is a great printer that can print out a ton of minis at once! This could be a great option if you’re willing to spend around $500.
Be sure to watch the video below for all the details.
Click Here to Get Your Elegoo Saturn 2 3d Printer!
Be Sure To Follow Fauxhammer: Website or YouTube
What do you think of the Elegoo Saturn 2printer from this review for 3d printing Warhammer 40k and other miniatures?
Let us know in the comments of our Facebook Hobby Group, or our new Discord server, and make sure you enter the latest monthly giveaway for FREE today!
Get ad-free access to the site, a monthly crate of miniatures, and support some of the best creators out there for as little as $6 a month on Patreon!
This post contains affiliate links, as an Amazon Associate Spikey Bits earns from qualifying purchases.
About the Author: Travis Pasch
Travis Pasch
Job Title: Head Writer & Editor
Joined: 2019
Socials: @paschbass
Bio: Dark Eldar Dracon and Warhammer 40k hobbyist since the third edition in 1998. He also loves camping because you can only paint so much! He joined the Spikey Bits team in 2019 and has been the main daily writer since 2020.
Maybe one day, he’ll finish converting all his Ad Mech models and turn into a true tech enjoyer, complete with sad and happy robot noises!
