Checkout this new Necron conversion I came up with!
This is my version of the Tomb Blade (based off the artwork), and while its not exact I think it conveys the look and feel pretty good(?)
So first off lets take a look at the art from the book that I based the model on.
Here you can see the tomb blade in motion with its twin Gauss Blasters mounted fore, wing vectors to the side, and bit of a crescent cowl around the pilot.
There is also a targeting array called the Nebuloscope that allows the pilot to track targets in HDTV. Obviously since they are robots, they don’t need things like cockpits, or life-support- just lots and lots of dubstep, lol.
Below is the list of bits I used for the conversion, with links back to Spikey for the pics. While I did use bits from quite a few kits on this, you can easily find substitutions for some of the parts to keep the costs down. Which is good, because these things aren’t fielded in ones, and cheaper is better.
Bits Parts List
- Ghost Ark Steersman Chair
- Ghost Ark Pilot
- Command Barge Armor Plates
- Immortal Gauss Blasters Set
- Command Barge Prow Set
Optional Parts List
So with the artwork in mind I set about making the base for the Tomb Blade. Originally I wanted to use the Command Barge pilot and assembly, but ended up going with the Ghost Ark steersman and chair because it was “easy”.
I’m sure with a little more creative effort that what I put in, someone could make the Command Pilot and Gunner set work for the whole thing; weapon AND figure mount. That would reduce the overall costs for these, and seems pretty plausible.
So there is a little side challenge for you creative types out there, make that work and send me some pics to share!
How I Made the Model
Okay so back to the conversion. To start first off I just took the chair assembly and pinned the base of Command Barge Prow bit to it. The arrow indicates where the Prow Bit (shaded in red) was pinned. I had to cut down the prow bit right where the front part starts to curve up, but it’s a very easy cut to figure out.
Then I topped the prow bit with the leg rest for the Command Barge pilot, and cut down and re-positioned the panels that attach to the prow bit (again shaded in red) to fit the space created. Note there are extra fins left over from this bits pack. They can be glued on somewhere to represent the Shield Vanes upgrade.
Next I cut down the harness that holds the Command Barge pilots and pinned it to the assembly I just created in the last step (shown by the arrow).
I’m sure you could replace this bit with something if you wanted to, but I had one lying around from making my Cryptek conversion so I put it to use.
Then I cut down and re-positioned two Gauss Blasters from the Immortals kit to make them symmetrical to each other. They had to mount on each side of the assembly I had just created, and look identical- which was hard cause these were both right handed weapons, lol. But I moved their little coil fins some, and tinkered a bit to make it work.
The Command Barge Armor plates attach to each side like shown. I cut the down the rear end of the plates some to fit the shape of the vehicle, but the cut isn’t really set in stone. Just whatever looks good is the key to this project.
I added the pilot from the steersman kit with a alternate head, and some of the Command Barge Pilot arms (the ones that are pushing buttons and such). Last I took a section of wiring from the Gauss Blasters I cut down and mounted it vertically to make the Nebuloscope targeter.
That’s pretty much it. Check the Three Sixty below for all the angles!
Don’t forget to checkout my other Necron Conversions too. I have a few more of them on the way as I build up to the big article on my Night/ Doom Scythe model.
How’s it look compared to the art? Anyone seen any other jetbike conversions out there? -MBG
Get 20% OFF Bits, and FREE SHIPPING??!! Over at the Spikey Bits Online Store, all bits are 20% OFF, and ship for FREE! We also have reduced shipping for overseas customers, as well as a special rate for shipping to Canada!
About the Author: Rob Baer
Rob Baer
Job Title: Managing Editor
Founded Spikey Bits in 2009
Socials: Rob Baer on Facebook and @catdaddymbg on X
About Rob Baer: Founder, Publisher, & Managing Editor of Spikey Bits, the leading tabletop gaming news website focused on the hobby side of wargaming and miniatures.
Rob also co-founded and currently hosts the Long War Podcast, which has over 350 episodes and focuses on tabletop miniatures gaming, specializing in Warhammer 40k. and spent six years writing for Bell of Lost Souls.
Every year, along with his co-hosts, he helps host the Long War 40k Doubles Tournament at Adepticon and the Long War 40k Doubles at Las Vegas Open, which attracts over 350 players from around the world.
Rob has won many Warhammer 40k Tournaments over the years, including multiple first-place finishes in Warhammer 40k Grand Tournaments over the years and even winning 1st place at the Adepticon 40k Team Tournament.
With over 30 years of experience in retail and distribution, Rob knows all the products and exactly which ones are the best. As a member of GAMA (Game Manufacturers Association), he advocates for gaming stores and manufacturers in these difficult times, always looking for the next big thing to feature for the miniatures hobby, helping everyone to provide the value consumers want.
While he’s played every edition of Warhammer 40k and Warhammer Fantasy (since 5th Edition) and has been hobbying on miniatures since the 1980s, Titans of all sizes will always be his favorite! It’s even rumored that his hobby vault rivals the Solemnance Galleries, containing rulebooks filled with lore from editions long past, ancient packs of black-bordered Magic Cards, and models made of both pewter and resin.
