Upgrade your Primaris Impulsor Tank with the latest conversion bits out there today, and keep your enemies off your tailgate!
If your Impulsor Tanks seem a little bit too open for your taste, there are a ton of awesome kits! Whether you want chapter-specific ones or just generic ones, we got you covered!
If the base kit wasn’t cool enough, you get to make it even better now and cover the back of your tank. That’s not everything though, there are weapons, sponsors, and so much more! Let’s take a closer look.
New Rhinoback- Impulsor Conversion Kit: $19.99
This is just a super easy bit to add to your tanks that make them look that much cooler. If you love what Pop Goes the Monkey is up to, check out some of their other stuff here!
Let’s hear from them about all the specs on this:
The Rhinoback crew compartment comes in 4 pieces and meant to fit onto the back section of the Primaris Impulsor kit. The Tailgate slots into a working hinge on the back section of our kit and snaps into place when closed.
The top hatch has 2 different sides. One side allows you to add on the turret-mounted weapon options of the impulsor kit, and the other side features a classic rhino-style hatch. This piece fits snuggly into the roof so gluing is not required. This opening is compatible with other “Top Hatch “components sold here in the store, such as the Tornado VLS Hatch.
How They Look on the Tank:
The roof section also incorporates a banner stand that will work with our MaMag Vexilla system which utilizes two, 1/16″ x 1/8″ (2mm x 3mm) Cylinder Magnets, to affix the Vexilla (banner) to both the Vehicle and the backpack. This can be an easy way to identify which units are embarked in the vehicle. Once that unit disembarks, simply remove the banner from its stand and attach it to the banner carrier.
These magnets can be found in many retailers online but we recommend our friends over at the Magnet Barron.
Chapter Specific Impulsor Kits- Full Rhinoback Upgrade: $29.99
We’ve used a ton of their kits in the past and they always fit on without much work and are super high-quality. If you want an easy conversion to set your Impulsors apart, this is perfect! If you love what Pop Goes the Monkey is up to, check out some of their other stuff here!
This conversion kit is meant to fit the Primaris Impulsor model kit (Not the Repulsor kit). We kept the standard “Top-Hatch” fitting of our Rhino Chassis parts so, this kit will allow you to incorporate many of our other conversation parts like missile launchers and turret weapons.
The front plate replaces the associated part of the Impulsor kit, but the rest of the parts like the crew compartment and vehicle insignias are simply added to your model. The best part is that our branded tailgate slots into a working hinge on the back section of the crew compartment. It can open and once it’s closed, it snaps into place.
Impulsor Front Plate: $15.99
If you don’t want to do too big of conversion, these work great. Just with the front plate, you will give your tanks a totally different feel.
Branding Kits: $19.99
These components are designed to be able to fit the Primaris Impulsor kit to give your model a unique look. The front plate replaces the associated part of the Impulsor kit. This kit also includes a set of add-on vehicle insignia to fit the open area on either side of the vehicle.
Murmillo Tank Upgrade Kit: $34.99
The multipart kit of the Murmillo Tank Upgrade For Hover Tank is made on a high-quality resin printer. It fits perfectly with the original Impulsor Tank by Games Workshop. Just an easy and fast way to get access to the new tank!
Here’s everything that the kit comes with:
- back part (back, door, back vents)
- top part
- turret (bottom, top, back, two antennas, antenna holder)
- all three turret weapon variants (Valiant, Lancer, Reaper)
- 2 side weapon variants (quad bolter and melta)
- hatch and hatch door (the hatch is possible to break into two parts for an open-top.)
- turret grenade launchers
- turret Weapons come pre-drilled for magnets so you can swap them out!
This product is officially licensed by Bitshapers. If you are after just the .STL files, they are available on Bitshapers Page Here
All the Variants:
The kit comes with all the necessary parts to make any of the variants. We would recommend magnetizing them (with the holes pre-drilled), so you can take advantage of whatever you need for a game.
Primaris Impulsor Conversion Sponsons:
Whether you want more bolter fire or the heavier melta option, you can with this kit! They fit into the existing sponsors for the Impulsor tank.
Hover Transport Closed Back – Bitshapers: $14.99
A multipart Hover Transport Closed Back kit will be made for you on a high-quality resin printer. Closed-back upgrade bits for the Space Marines Impulsor model by Games Workshop that fits perfectly with the existing kit (see photo).
This Kit Contains:
- top part
- back part
- back door (interchangeable)
The back door is the same as the Bitshapers Repulsor series and fits perfectly with any other Repulsor backdoors.
That does it for this one, don’t miss a great way to upgrade your Primaris Impulsor Tank with the latest conversion bits!
Click Here to Get Your Primaris Impulsor Tank Kits!
About the Author: Travis Pasch
Travis Pasch
Job Title: Head Writer & Editor
Socials: @paschbass
About Travis Pasch: Travis has been a Warhammer 40k hobbyist since the 1990s, playing the game since Third Edition. Through extensive traveling, he’s seen a lot of the miniatures hobby from across the world, giving him a unique perspective on the latest gaming topics and trends.
Travis’s brother even owns a commission painting studio, where he’s picked up a lot of good advice and techniques for painting Warhammer and tabletop miniatures over the years, as well. Travis joined the Spikey Bits team in 2019 and has been the lead writer since 2020.
Currently, he’s working on converting all his 40k Adeptus Mechanicus models and becoming a true tech enjoyer, complete with both sad and happy robot noises!
