A Plastic Warhound Titan sprue just surfaced online, and for the first time, the long-running rumor has physical parts, and here’s what it may cost.
After years of rumors, we’ve finally got an actual Plastic Warhound Titan sprue to look at.
Remember the plastic Warhound rumors we covered in August? Back then, we’d heard the kit was supposedly designed and tooled, but nobody had anything to show for it. Well, photos hit Reddit on November 5, 2026, showing a frame of grey plastic with parts that look a whole lot like a Warhound.
Now, we’ve all seen convincing hobby leaks turn out to be nothing. But at least there’s something here we can actually examine instead of another round of “trust me, bro.” Games Workshop hasn’t confirmed anything yet, so until GW shows us the real deal, this is still firmly in rumor territory.
- The leak: a sprue with what looks like Warhound carapace, armor and void shield generator parts surfaced on Reddit on November 5.
- The source: the Reddit poster says Instagram, other threads point to a Vinted listing, and nobody has verified either one.
- The catch: the sprue hasn’t been authenticated or measured, and the rumored 2026 date on it hasn’t been confirmed.
The Parts on This Sprue Look Like a Warhound Titan!
Updated on November 5th, 2026, by Rob Baer with the sprue leak.
First up, look at that big curved piece. That pretty much looks 1:1 like the Warhound’s upper hull, compared to both the smaller Legions Imperialis Warhound and the Forge World resin version. The shape looks pretty close. There’s also a piece below it that looks like the central lower torso armor, which should look familiar if you’ve ever built one of these things.
But those round pieces down in the lower-right corner? Those might be the more interesting bits. People are comparing them to the Warhound’s void shield generator housings, and that’s a pretty specific detail to get right by accident. Even the gates, part layout, and construction on the back look like normal injection-molded GW plastic to the folks checking them out.
There’s also what might be an Eye of Horus on the frame, and some people reckon they can spot a 2026 date. If that’s true, then this kit could be for both Warhammer 40k games and Horus Heresy as well.
Regardless, even if the parts look right, we don’t know whether this is a production sprue, test shot, or prototype, but it seems to be the same size as the resin Warhound, at least. But for now it’s unclear how many sprues the full kit would need, or whether the weapons would be included.
That Hand Holding the Sprue Looks Awfully Familiar
Now, here’s an interesting little detail. GW revealed the new plastic Ork Nobz on August 10, and three days later we covered a Nobz sprue that allegedly turned up in a Stormraven box. Someone on Reddit has since put that earlier Nobz photo next to the Warhound pictures, and there’s something familiar about them. The hand holding the sprue looks similar, and so does the wood-panel background.
Other commenters noticed the same thing, with some wondering whether both sets of photos came from the same person or were taken in the same room. If they’re right, maybe we’re not looking at two completely unrelated leaks. There could be several unreleased sprues coming through the same source.
Of course, matching hands and tables isn’t exactly solid proof. That doesn’t tell us who took the pictures, where the sprues came from, or whether there’s any real connection between them.
But it is something that makes this all look “as planned,” almost as if the leak came from the Games Workshop’s leak desk, so to speak.
GW Already Turned a Big Resin Kit Into Plastic
If you’ve been in the hobby a while, you know the full-size Warhound has been a Forge World resin kit for years. It’s roughly 250mm tall, depending on how you pose it, and building one is a whole different experience from putting together a plastic Knight. There’s the weight, all those parts, and plenty of pinning. Plus, the chassis and weapons have historically been sold separately, which wasn’t exactly great for the hobby budget.
But GW has been making plastic Titans for a while now, just not at that size. Adeptus Titanicus gave us plastic Warhounds back in 2018 at epic scale. Then the Legions Imperialis launch box brought two more epic Warhounds in 2023, with standalone Warhound and Dire Wolf kits showing up in March 2024 previews. So GW clearly has experience making these things in plastic. Making a full-size one would just need a whole lot more tooling.
And don’t forget the Cerastus Knights. The Lancer was a resin kit for nearly a decade before GW revealed the plastic version on April 30, 2023. Pre-orders opened on August 5, and the Acheron and Castigator followed on September 23. GW even talked about keeping much of the resin kit’s posing while reworking it for plastic. That’s why the plastic Cerastus Knights are worth keeping in mind here. We’ve already seen GW make that kind of jump from resin to plastic.
Now, a Warhound would be a much bigger project than a Knight, both for engineering and cost. Still, the rumors have been hanging around. Chapter Master Valrak was talking about a plastic Warhound for 40k and Horus Heresy in October 2025, Bolter & Chainsword covered it that same month, and by August 10 we’d heard the kit was already designed and tooled.
Plastic Doesn’t Automatically Mean Cheap
Hypothetical UK prices versus £566.50 (roughly $90o US) historical resin price
- £200 (roughly $325 US): Aggressive pricing that would make a plastic Warhound Titan far more appealing to collectors.
- £250 (roughly $405 US): A reasonable midpoint based on comparable Games Workshop regional pricing.
- £300 (roughly $490 US): Premium pricing, but potentially a substantial savings compared to the existing resin Warhound.
- £350 (roughly $570 US): Still expensive, with less dramatic savings compared to resin.
Of course, everyone wants to know what a plastic Warhound might cost. Our August report had the rumored UK price somewhere between £200 and £300, with around $450 being mentioned for the US. For comparison, a resin Warhound with weapons cost £566.50 back in October 2025, according to a Bolter & Chainsword pricing thread. That’s an older price, by the way, not what we’re quoting from the store today.
Even at £300, you’re talking about roughly half the old resin cost. And let’s be fair, not having to deal with heavy resin parts, all that prep, and the pinning would make the build a lot more appealing to plenty of hobbyists.
But don’t assume plastic means bargain prices. The number of sprues, tooling costs, and how GW decides to sell the kit will all matter. We’d also want to know exactly what’s in the box. Are we getting a complete Warhound with weapons, or are we buying the body and picking up the guns separately like before?
Final Thoughts on the Plastic Warhound Titan
So what would actually clear all this up? For starters, finding that original Vinted listing or Instagram post would help a lot. A sharper photo where we could properly read the supposed 2026 marking wouldn’t hurt either. Beyond that, we’re waiting on GW. One Warhammer Community preview would answer the biggest question pretty quickly.
As for when we might see one, that’s still anyone’s guess. A Christmas or holiday-season preview could fit with how these rumors have been circulating, but nobody has an actual reveal date. An announcement in early 2027 followed by a later release would also fit the way GW tends to handle big centerpiece kits. And even if the 2026 marking turns out to be real, remember that test sprues can appear well before a kit goes on sale.
Either way, if these pictures check out, we’re a lot closer to a plastic Warhound than we were when those August rumors first appeared. If not, well, we’re back to waiting for this and a plastic Thunderhawk to actually drop…
Massive Imperator Titan Model Takes 40k to New Heights
🔗 Related Reads:
- Plastic Warhound Titan: 40k Release Rumors Are Back
- Ork Nobz Leak Early, Packed Inside a Stormraven Box
- Plastic Forge World Acheron Sprue Leaked
- How to Build & Magnetize the Cerastus Knights
- Legions Imperialis Launch Lineup Pre-Order Revealed
- Magnetizing the Warhound Titan for Adeptus Titanicus
- Titan Articles & News
What do you think of the plastic Warhound Titan sprue leak, and would you buy one in plastic?
















I was never a fan of the Forgeworld Warhound, which is based on Dave Andrew’s ugly model from Epic 40,000. Jes Goodwin’s original metal Warhound from Adeptus Titanicus is so much better.
I just want a plastic Dreadclaw.