Here’s how to assemble and magnetize both versions of the Primaris Invictor Tactical Warsuit in our unboxing and build tutorial!
Back when this kit came out, Rob did an unboxing to show all the details and how to magnetize it, but we wanted to revisit it now that the Magnet Baron has a kit made specifically for it!
Let’s jump into how you can magnetize yours and get the most out of the kit.
Primaris Invictor Tactical Warsuit:
Click here to get yours for less from these retailers: | Amazon | Dicehead Games | Bazooka Games | Frontline Gaming |Â
The kit came out in 2019, but it’s a little tricky to magnetize the whole thing, so let’s get into it!
Primaris Invictor Tactical Warsuit Unboxing &Â Instructions
First up, we fold the pages back on the Primaris Invictor Tactical Warsuit assembly instructions to see what we are getting ourselves into. This new kit comes with three sprues and has 116 bits with nine pages of assembly instructions.
The weapons are different assemblies, meaning you should be able to magnetize them easily (hint, you can). Just one thing to be really careful about with this kit: there are a ton of do not glue parts if you want all the moving bits; it’s just something to look out for.
Sprues:
As far as quality, this kit looks amazing. This new Dreadnought kit has some crisp and hard lines and is full of details.
Magnetize & Build Primaris Invictor Tactical Warsuit
Now, onto the important part. To start, the torso will take 2 6mm x 2mm magnets, and it’s pretty easy to get them in the right spots. However, the tubes on the back are quite fragile, so just be careful when putting those on.Â
Luckily, you don’t have to worry about magnetizing the arms as they are slotted in, so one less thing to worry about!
You can, however, magnetize the powerfist arm to hold the pistol with a 1/4×1/16″ magnet (same for the powerfist on its own as well), but some people don’t, as you can glue the gun on the side and just have the normal powerfist on there.Â
For the guns, you will have to jam a little bit of sprue where the cog piece should be and then glue the 5mm x 2mm magnet on top of that. You will have to do this for each weapon, so you will need three magnets in total.Â
If you want to get really crazy, you can put a magnet in the hip and a tiny magnet on the pistol (sizes below) to always have all the options!
Built Model:
This is honestly a really cool kit, and you can do a ton with the magnetization and movement of this model. Now, if you want to get all the magnets you need in one buy, check out the kit from the Magnet Baron below.
Magnetize the Invictor Warsuit Kit: $10.99
We get all our magnets for hobbying from The Magnet Baron. Use coupon code Spikey10off to get 10% off your next order with them!
Get the exact magnets you need for this tutorial, with this kit! There are even a couple extra of each magnet just in case something goes wrong.
Here are the specs for the kit:
What is included:
- Pistol 3x 2mm x 1mm
- Power Fist 1 6mm x 2mm
- Arm Wrist 1 6mm x 2mm
- Pistol Grip Hand 1 1/4×1/16
- Waist/Torso 2x 6mm x 2mm
- Hip (goes inside saucer plate to attach heavy bolter) 6mm x 2mm
- Weapon Arms 3x 5mm x 2mm one for each weapon (attach non cog connector weapon with a bit of sprue)
- 3pcs 2mm x 1mm (1/16″ x 1/32″)
- 6pcs 6mm x 2mm (1/4″x1/16″)
- 3pcs 5mm x 2mm (3/16″x1/16″)
- All magnets are the highest N52 Grade Triple Coated with NiCuNi
Be sure to watch the video for all the details!
Click Here To Buy Your Primaris Invictor Tactical Warsuit
What do you think of how to magnetize the Invictor Warsuit in our unboxing and build tutorial?
Let us know in the comments of our Facebook Hobby Group, or our new Discord server, and make sure you enter the latest monthly giveaway for FREE today!
Click Here To Follow Us On Google News
Get ad-free access to our hobby videos, a monthly drop of miniatures, and support some of the best creators out there for as little as $6 a month on Patreon!
