The kits from the Pariah Nexus box have finally come out separately, check Rob’s thoughts on the Primaris Heavy Intercessors and Flayed Ones!
We’re back unboxing the new Necron and Space Marine contents all separately, including the characters! Rob sees what it takes to get them ready for the tabletop, shows the size of the models, and tells you the GOTCHAS to be aware of when building them!
We are going to show you everything including the sprues, bits, and of course, the cost. That way you can decide if this is worth your hard-earned hobby dollars.
Primaris Heavy Intercessors & Flayed Ones: Unboxing
Get Yours For Less From Amazon or Dicehead Games!
These are the four kits we’re going to take a look at today, and they were a little more expensive than we predicted them to be. With the Heavy Intercessors clocking in at $60 and the Flayed Ones at $50. So that’s unfortunate, considering we thought they would all be cheaper (why would we think that?). The Chronomancer and Captain both come in at $35. These were allocated as well, with the Necrons getting the worst of it, so grab them where you can.
The Space Marines Instructions and Sprues
The Heavy Intercessor kit is fairly similar to the normal guys with just a few more bits. Overall though the bits look great, have a ton of detail, and nothing looks too terrible to build. The Captain sprue is pretty small but does look very dynamic.
The Captain looks fairly easy to build other than the right leg. It doesn’t really lock into the hip, so that could be a problem. The Heavy Intercessors also don’t look very hard to build either and do have a decent amount of options.
The heavy gunners have three different options for their guns, but that does make the parts small, so could be a little hard to work with. They also give you a bunch of extras like grenades, holstered weapons, and auspex.
Heavy Intercessors
There’s no denying these are some cool minis! The two things you really need to watch out for are the tubes going into the backpack, which took a while to get right, and the heads. Not all the heads can look forward on all the bodies, so be sure to look at what heads go to which minis.
This guy you can either give him the fist or fingers out arm. But since his head wasn’t as sliced, you can have him looking either way.
They aren’t that much bigger than the normal dudes but are a little bulkier and thicker.
Captain
The Captain is very dynamic and overall looks cool! The only issue with him was the cape doesn’t fit together perfectly, so be sure to fill that gap for a better paint job. He also doesn’t have many options, so this is pretty much what you’ll get with him.
Nothing crazy here, as he’s about the same size as the Captain from Indomitus.
Necrons Sprues & Instructions
The Flayed One’s sprue is pretty small and a little disappointing in terms of bits but they do look very detailed. But when the new box comes out, these could very well have ten Flayed Ones in the kit.
The Chronomancer sprue is pretty simple with a front and back that snap together. Still, the bits look highly detailed.
Luckily, this Chronomancer looks fare easier to build than the previous Necron guy as it all looks to slot in fairly easily. The mini also comes with multiple head options and some hand options.
The Flayed Ones, look fairly fiddly and very thin. So Rob recommends using the Tamiya Extra Thin Cement since it won’t just go everywhere if you put too much on. Rob is a little worried about how long they will take, there are just so many small parts, but we’ll see!
Flayed Ones
They are a little fiddly, but they went together way better than Rob expected! While some of the parts were a little annoying, it wasn’t nearly as terrible as he thought they would be. Overall Rob is very impressed with the minis. Obviously, they aren’t ETB, so they will have some mold lines to trim.
They are basically the same size as the Warriors, but we expected that.
Chronomancer
The Chronomancer went together fairly easily, so another welcome surprise.
About the same size as the Psychomancer and just way, way easier to build!
Patreon
Also, people who support our Patreon get minis from these unboxings every month. So if you want some cool minis like this, be sure to check out our Patreon. Not only can you get exclusive models like this, but you also get up to double your money back in miniatures as well.
What do you think of the boxes? Will you be picking any of them up?
Let us know in the comments of our Facebook Hobby Group, and make sure you enter the latest monthly giveaway for FREE today!
You can also support us on Patreon and get ad-free access to the site, plus a ton of minis that helps support some of the best creators out there! This post contains affiliate links, as an Amazon Associate Spikey Bits earns from qualifying purchases.
This post contains affiliate links, as an Amazon Associate Spikey Bits earns from qualifying purchases.
About the Author: Travis Pasch
Travis Pasch
Job Title: Head Writer & Editor
Socials: @paschbass
About Travis Pasch: Travis has been a Warhammer 40k hobbyist since the 1990s, playing the game since Third Edition. Through extensive traveling, he’s seen a lot of the miniatures hobby from across the world, giving him a unique perspective on the latest gaming topics and trends.
Travis’s brother even owns a commission painting studio, where he’s picked up a lot of good advice and techniques for painting Warhammer and tabletop miniatures over the years, as well. Travis joined the Spikey Bits team in 2019 and has been the lead writer since 2020.
Currently, he’s working on converting all his 40k Adeptus Mechanicus models and becoming a true tech enjoyer, complete with both sad and happy robot noises!
